Dell PowerEdge T410 - Manual (Page 116)

116
Installing System Components
11 Connect any expansion-card cables for the new card.
See the documentation that came with the card for information about its
cable connections.
12 Lower the expansion card stabilizer.
13 Close the system. See "Closing the System" on page 91.
14 Place the system upright and on its feet on a flat, stable surface.
15 Rotate the system feet outward.
16 Reattach any peripherals and connect the system to an electrical outlet.
17 Turn on the system and attached peripherals.
18 Install any device drivers required for the card as described in the
documentation for the card.
book.book Page 116 Tuesday, June 9, 2009 4:09 PM