Dell PowerEdge T410 - Manual (Page 146)

146
Installing System Components
7 Disconnect all the cables that are routed over the notch in the SAS
backplane board.
8 To remove the SAS backplane:
a Pull the blue release pin and slide the backplane upwards.
b Pull the backplane away from the front of the system until the
securing slots are free from the tabs on the chassis.
Figure 3-27. Removing and Installing the SAS Backplane
1
6
5
2
3
4
book.book Page 146 Tuesday, June 9, 2009 4:09 PM