beautypg.com

Diagnostic lights, Tools to help solve problems – Dell Precision 370 User Manual

Page 97

background image

Back to Contents Page

Tools to Help Solve Problems

Dell Precision™ Workstation 370 User's Guide

Diagnostic Lights

Beep Codes

Error Messages

Dell Diagnostics

Drivers

Using Microsoft® Windows® XP System Restore

Resolving Software and Hardware Incompatibilities

Reinstalling Microsoft® Windows® XP

Diagnostic Lights

CAUTION:

Before you begin any of the procedures in this section, follow the safety instructions located in

the Product Information Guide.

To help you troubleshoot a problem, your computer has four lights labeled "A," "B," "C," and "D"on the front of the desktop

computer and on the back of the mini-tower computer. The lights can be yellow or green. When the computer starts

normally, the lights flash. After the computer starts, all four lights display solid green. If the computer malfunctions, the color

and sequence of the lights identify the problem.

Diagnostic Light Codes During POST

Light Pattern

Problem Description

Suggested Resolution

A possible BIOS failure

has occurred; the

computer is in the

recovery mode.

Run the BIOS Recovery utility, wait for recovery completion, and then restart

the computer.

A possible processor

failure has occurred.

Reinstall the processor

and restart the computer.

Memory modules are

detected, but a

memory failure has

occurred.

1.

Reseat the memory modules

to ensure that your computer is successfully

communicating with the memory.

2. Restart the computer.

3. Run the

Dell Diagnostics

.

4. If the problem persists,

contact Dell

.

A possible expansion

card failure has

occurred.

1. Determine if a conflict exists by

removing a card

(not the graphics card)

and then restarting the computer.

2. If the problem persists, reinstall the card that you removed, remove a

different card, and then restart the computer.

3. Repeat this process for each card. If the computer starts normally,

troubleshoot the last card removed from the computer for resource

conflicts (see "

Resolving Software and Hardware Incompatibilities

").

4. If the problem persists,

contact Dell

.

A possible graphics

card failure has

occurred.

1. If the computer has a graphics card, remove the card,

reinstall it

, and

then restart the computer.

2. If the problem still exists, install a graphics card that you know works

and restart the computer.

3. If the problem persists or the computer has integrated graphics,

contact

Dell

.