Dell Precision 370 - Manual (Page 101)

See " Memory Problems ."
Attachment failed to respond — See " Drive Problems ."
Bad command or file name — Ensure that you spelled the command correctly, put spaces in the proper
place, and used the correct path name.
Bad error-correction code (ECC) on disk read — See " Drive Problems ."
Controller has failed — See " Drive Problems ."
Data error — See " Drive Problems ."
Decreasing available memory —
See " Lockups and Software Problems ."
Diskette drive 0 seek failure — See " Drive Problems ."
Diskette read failure —
See " Drive Problems ."
Diskette subsystem reset failed — Run the Dell Diagnostics .
Diskette write protected — Slide the write-protect notch to the open position.
Drive not ready — Put a floppy disk in the drive.
Gate A20 failure —
See " Lockups and Software Problems ."
Hard-disk configuration error —
Hard-disk controller failure —
Hard-disk drive failure —
Hard-disk drive failure —
See " Drive Problems ."
Insert bootable media Insert a bootable floppy disk or CD.
Invalid configuration information - please run SETUP program — Enter system setup and correct the
computer configuration information.
Keyboard failure — See " Keyboard Problems ."
Memory address line failure at address, read value expecting value — See " Lockups and Software
Problems ."
Memory allocation error —
1. Turn off the computer, wait 30 seconds, and then restart the computer.
2. Try to run the program again.
3. If the error message appears again, see the software documentation for additional troubleshooting
suggestions.
Memory data line failure at address, read value expecting value —
Memory double word logic failure at address, read value expecting value —
Memory odd/even logic failure at address, read value expecting value —