Dell Precision 370 - Manual (Page 92)

1 chassis-intrusion switch
connector
7 headphone connector
2 speaker connector 8 IEEE 1394 connector
3 front-panel IEEE 1394
connector
9 USB 2.0 connector
(2)
4 audio connector 10 USB 2.0 connector
(2)
5 front panel connector 11 diagnostic lights (4)
6 control-panel connector
Removing the I/O Panel
1. Follow the procedures in " Before You Begin ."
2. Disconnect all cables that are connected to the I/O panel.
Note the routing of the control panel cable as you remove it from the computer so that you can replace it correctly.
3. From inside the computer cover, remove the mounting screw that secures the I/O panel to the computer.
4. Remove the I/O panel from the computer.
Mini-Tower Computer