Dell Precision 370 - Manual (Page 35)

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in
the Product Information Guide.
NOTICE: This process erases both the system and setup passwords.
1. Follow the procedures in " Before You Begin ."
Jumper Setting Description
PSWD
Password
features are
enabled
Password
features are
disabled
CLR_CMOS
Normal
CMOS
function
Clears the
CMOS
settings
jumpered unjumpered
2. Locate the 3-pin password jumper (PSWD) on the system board, and attach the jumper plug to pins 2 and 3 to clear
the password. For more information for the mini-tower computer, see " System Board Components " for the desktop
computer, see " System Board Components ."
NOTE: When you receive your computer, the jumper plug is attached to pins 1 and 2.
3. Close the computer cover .