Dell PowerEdge RAID Controller S110 - Manual (Page 30)

28 RAID Configuration and Management
Before you Begin
• At any point in this procedure, return to a prior state by pressing >.
• A maximum of eight virtual disks can be created with the PERC BIOS
Configuration Utility.
NOTE: Mixing of RAID levels is not allowed on same physical disk(s).
NOTE: The Create Virtual Disk operation is not selectable when there is no
available capacity on the physical disks.
1 Power-up the system to start booting.
2 When prompted, press the keys to access the PERC BIOS
Configuration Utility.
3 At the Main Menu field, use the arrow keys to select Create Virtual
Disk. Press .
4 At the Physical Disks field, select the physical disk(s) on which to create
a virtual disk:
a For each physical disk, press the key to select the physical
disk. (The physical disks can be inserted in any order.)
b After selecting the physical disk(s) to be included in the virtual disk,
press .
5 At the User Input field, use the arrow keys to select a virtual disk type
(RAID level). Press . (Only the virtual disk types that can be
created with the selected physical disk(s) that are indicated; they are
highlighted in white text).
6 If hot spares are applicable:
a At the User Input field, use the arrow keys to select a dedicated hot
spare. Press .
NOTE: A hot spare can be assigned after a virtual disk is created, by selecting
the Manage Hot Spare(s) option.
b At the Physical Disks field, select the physical disk to use as a hot
spare (if applicable). Press to select it.
c Press to add the hot spare. Press the key to confirm
the change.
A5_bk0.book Page 28 Thursday, May 29, 2014 11:37 AM