Dell PowerEdge RAID Controller S110 - Manual (Page 20)

18 Installing the Drivers
NOTE: This step is also applicable for the Dell PowerEdge R220 systems that
support Microsoft Windows Server 2012, Microsoft Windows Server 2012 R2, and
Microsoft Windows Server 2008 R2 SP1 operating systems.
Pre-Installation Requirements for the Controller
Drivers
• Make sure that your system has the latest BIOS and firmware updates from
the Dell Support website at dell.com/support/manuals.
• Perform the pre-installation procedures before you install the controller
drivers and the operating system.
• When you are ready to install the controller drivers and operating system
see "Installing the Controller Drivers During the Operating System
Installation" on page 21.
Downloading the Microsoft Windows Drivers
1 Go to dell.com/support.
2 Enter your system Service Tag and click on Submit.
The Product Support page is displayed.
3 Click on Get drivers and dowloads.
4 Click on View All Drivers tab.
The Drivers and Downloads window is displayed.
5 Choose the applicable operating system.
6 Expand the SAS RAID category.
7 Select Download File for the appropriate controller driver.
NOTE: Load a blank optical medium (CD-ROM or DVD) in your system.
8 Use the blank optical medium to burn the ISO image.
9 Download the files for the PERC S110 to a CD-ROM, DVD, or USB flash
drive.
A5_bk0.book Page 18 Thursday, May 29, 2014 11:37 AM