Installing the drivers, Summary of installation procedure for windows – Dell PowerEdge RAID Controller S110 User Manual
Page 19
17
3
Installing the Drivers
The Dell PowerEdge PERC S110 RAID Controller requires controller drivers
to operate with the supported operating systems.
The installation method for the PERC S110 card drivers is dependent on the
type of system that you have and the type of Microsoft Windows operating
system that is installed in the system.
Summary of Installation Procedure for Windows
Server 2008, 2008 R2, 2012, and 2012 R2 on 12G
Systems
1 Download the PERC S110 card drivers. See "Downloading the Microsoft
2 Set the SATA Controller to RAID Mode. See "Setting the SATA Controller
3 Initialize physical disks. See "Initializing Physical Disks (as required)" on
4 Create a bootable virtual disk. See "Creating a Bootable Virtual Disk" on
page 19.
5 Check controller options and the boot list priority. See "Checking
Controller Options and the Boot List Priority" on page 19.
6 If applicable, change the boot priority list for devices. See "Change the
Boot Priority List for Devices (If Applicable)" on page 20.
7 Install the controller Drivers during the operating system installation. See
"Installing the Controller Drivers During the Operating System
8 For all Dell 12th generation (12G) systems that support Microsoft
Windows Server 2012 R2, you need to additionally install
bccfg3.sys
drivers manually. See "Installing bccfg3.sys Drivers" on page 22.
A5_bk0.book Page 17 Thursday, May 29, 2014 11:37 AM