Dell PowerVault 775N (Rackmount NAS Appliance) User Manual
Page 66
5. In the Arrays directory, select PERC Subsystem 1
→ <your_PERC_card>x (Cluster)→ (Channel 0) or (Channel
1).
where x indicates the number associated with the controller on the system. Select the channel (0 or 1) to which the
enclosure is attached.
6. If you downloaded the EMM firmware to a diskette, ensure that the diskette is inserted.
7. Right-click the enclosure icon for the desired channel, and select Download Firmware.
You can also click the channel number and select Download Firmware from the Task Menu.
8. From the Firmware Download dialog box, click Browse and navigate to the EMM firmware that you downloaded to
your hard drive or diskette.
9. Verify that the selected file is correct.
10. Click Download Firmware to begin the download process.
NOTE:
This process takes several minutes to complete.
11. When the message Firmware Downloaded Successfully appears, click OK.
through for each channel that has an enclosure attached.
13. To verify the firmware upgrade for each channel, right-click the channel number, select Properties, and view the
version information.
14. Start up node B and resume I/O activity.