Save storage array events – Dell PowerVault MD3000i User Manual
Page 167
Script Commands
167
NOTE:
When you use this command, you can specify any combination of the
parameters for global setting, virtual disk configuration setting, host topology, or
LUN mapping. To enter all settings, use the allConfig parameter. The parameters are
optional; you do not have to enter any parameters.
Save Storage Array Events
This command saves events from the Major Event Log (MEL) to a file. You
can save either all the events or only the critical events.
Syntax
save storageArray (allEvents | criticalEvents)
file="
filename
" [count=
numberOfEvents
]
Parameters
virtualDiskConfigAndSe
ttings
Saves the virtual disk configuration settings and all of
the global settings to the file. To save the virtual disk
configuration and global settings, set this parameter to
TRUE. To prevent saving the virtual disk configuration
and global settings, set this parameter to FALSE. The
default value is TRUE.
hostTopology
Saves the host topology to the file. To save the host
topology, set this parameter to TRUE. To prevent saving
the host topology, set this parameter to FALSE. The
default value is FALSE.
lunMappings
Saves the LUN mapping to the file. To save the LUN
mapping, set this parameter to TRUE. To prevent
saving the LUN mapping, set this parameter to FALSE.
The default value is FALSE.
Parameter
Description
allEvents | criticalEvents
Specifies whether to save all events (allEvents) or only
the critical events (criticalEvents).
file
Name of the file to which to save the events. You must
put quotation marks (" ") around the file name.
Parameter
Description