Dell PowerVault MD3000i - Manual (Page 180)

180
Script Commands
Parameters
NOTE:
Challenge Handshake Authentication Protocol (CHAP) is a protocol that
authenticates the peer of a connection. CHAP is based upon the peers sharing a
“secret.” A secret is a security key that is similar to a password.
NOTE:
Use the chapSecret parameter only for initiators requiring mutual
authentication.
Examples
-c "set iscsiInitiator [\"pe29000\"] userLabel=
\"pe29001\";"
-c "set iscsiInitiator <\"iqn.1991-
05.com.microsoft:svctag-70wnh91\"> userLabel=
\"29000\";"
-c "show iscsiInitiator[\"pe29000\"]
iscsiSessions;"
-c "show iscsiInitiator <\"iqn.1991-
05.com.microsoft:svctag-70wnh91\">
iscsiSessions;"
Set iSCSI Target Properties
This command defines properties for an iSCSI target.
Parameter Description
iscsiName The name of the iSCSI initiator for which you want to set
attributes.
userLabel The new name that you want to use for the iSCSI initiator.
host The name of the new host to which the HBA host port is connected.
Enclose the host name in double quotation marks (" ").
chapSecret The password that you want to use to authenticate a peer
connection.