Dell PowerVault MD3000i - Manual (Page 170)

170
Script Commands
Save Storage Array State Capture
This command saves the state capture to a file.
Syntax
save storageArray stateCapture file=" filename "
Parameters
Save Storage Array Support Data
This command saves the storage array support-related information to a file.
Syntax
save storageArray supportData file=" filename "
Parameters
Set Controller
This command defines the attributes for the RAID controller modules.
Syntax
set controller [(0 | 1)]
availability=(online | offline | serviceMode)
ethernetPort [1] = ethernet-port-options
globalNVSRAMByte [ nvsramOffset ]=
( nvsramByteSetting | nvsramBitSetting ) |
hostNVSRAMByte [ hostType, nvsramOffset ]=
Parameter Description
file Name of the file to which to save the state capture. You
must put quotation marks (" ") around the file name.
Parameter Description
file Name of the file to which to save the storage array
support-related data. You must put quotation marks
(" ") around the file name.