Dell PowerVault MD3000i - Manual (Page 140)

140
Script Commands
Delete Host
This command deletes a host.
Syntax
delete host [ hostName ]
Parameters
Delete Host Group
This command deletes a host group.
NOTICE:
This command deletes all of the host definitions in the host group.
Syntax
delete hostGroup [ hostGroupName ]
Parameters
Parameter Description
host Name of the host to delete. You must put brackets ([ ]) around the
host name. If the host name has special characters, you must also put
quotation marks (" ") around the host name.
NOTE:
A host is a system that is attached to the storage array and
accesses the virtual disks on the storage array through its HBA
host ports.
Parameter Description
hostGroup Name of the host group to delete. You
must put brackets ([ ]) around the host
group name. If the name of the host
group has special characters, you must
also put quotation marks (" ") around the
host group name.
NOTE:
A host group is an optional
topological element that is a collection of
hosts that share access to the same virtual
disks. The host group is a logical entity.