Dell PowerVault MD3000i - Manual (Page 219)

Script Commands
219
Parameters
Show Virtual Disk Copy
This command returns information about virtual disk copy operations. The
following information is returned:
• Copy status
• Start timestamp
• Completion timestamp
• Copy priority
• Source virtual disk WWID or target virtual disk WWID
• Read-only attribute setting of the target virtual disk
You can retrieve information about a specific virtual disk copy pair or all
virtual disk copy pairs in the storage array.
Syntax
show virtualDiskCopy (allVirtualDisks |
source [" sourceName "] |
target [" targetName "])
Parameters
Parameter Description
virtualDisk Name of the virtual disk running the long-running
operation. You must put quotation marks (" ") and
brackets ([ ]) around the virtual disk name. The virtual
disk name and quotation marks must be inside the
brackets.
Parameter Description
allVirtualDisks Returns information about virtual disk copy operations for all
virtual disk copy pairs.
source Name of the source virtual disk about which to retrieve
information. You must put quotation marks (" ") and brackets ([ ])
around the source virtual disk name. The source virtual disk name
and quotation marks must be inside the brackets.