Dell Vostro 2510 (Early 2009) User Manual

Page 60

NOTICE:

Before turning on the computer, replace all screws and ensure that no stray screws remain inside the

computer. Failure to do so may result in damage to the computer.

13. Turn on the computer.

NOTE:

If you use a BIOS update program media to flash the BIOS, press before inserting the media in order to

set the computer to boot from the media for one time only. Otherwise, you must enter the system setup program to

change the default boot order.

14. Flash update the BIOS (see

for more information).

15. Enter the system setup program to update the BIOS on the new system board with the computer Service Tag. For

information on the system setup program, see the Dell™ Technology Guide on your computer or at support.dell.com.