beautypg.com

Video and display problems, No sound from headphones, Only part of the display is readable – Dell Vostro 2510 (Early 2009) User Manual

Page 13

background image

Disconnect headphones from the headphone connector —

Sound from the speakers is automatically disabled when

headphones are connected to the computer's front-panel headphone connector.

Eliminate possible interference —

Turn off nearby fans, fluorescent lights, or halogen lamps to check for interference.

Run the Hardware Troubleshooter —

See

Hardware Troubleshooter

.

No sound from headphones

Check the headphone cable connection —

Ensure that the headphone cable is securely inserted into the headphone

connector. See the Setup and Quick Reference Guide for your computer at support.dell.com.

Adjust the Windows volume control —

Click or double-click the speaker icon in the lower-right corner of your screen.

Ensure that the volume is turned up and that the sound is not muted.

Video and Display Problems

CAUTION:

Before working inside your computer, read the safety information that shipped with your

computer. For additional safety best practices information, see the Regulatory Compliance Homepage at

www.dell.com/regulatory_compliance.

NOTICE:

If your computer came with a PCI graphics card installed, removal of the card is not necessary when

installing additional graphics cards; however, the card is required for troubleshooting purposes. If you remove the card,

store it in a safe and secure location. For information about your graphics card, go to support.dell.com.

Check the diagnostic lights —

See

Diagnostic Lights

.

Check the display settings —

See the Dell™ Technology Guide on your computer or at support.dell.com.

Adjust the Windows display settings —

Windows XP:

1. Click StartControl PanelAppearance and Themes.

2. Click the area you want to change or click the Display icon.

3. Try different settings for Color quality and Screen resolution.

Windows Vista:

1. Click Start

® Control Panel® Hardware and Sound® Personalization® Display Settings.

2. Adjust Resolution and Colors settings, as needed.

Only part of the display is readable

Connect an external monitor —

1. Shut down your computer and connect an external monitor to the computer.

2. Turn on the computer and the monitor and adjust the monitor brightness and contrast controls.

If the external monitor works, the computer display or video controller may be defective. Contact Dell Support.