Dell Vostro 2510 (Early 2009) - Manual (Page 54)

Back to Contents Page
Internal Card With Bluetooth® Wireless Technology
Dell™ Vostro™ 2510
Service Manual
Removing the Card
Replacing the Card
CAUTION: Before working inside your computer, read the safety information that shipped with your
computer. For additional safety best practices information, see the Regulatory Compliance Homepage at
www.dell.com/regulatory_compliance.
If you ordered a card with Bluetooth wireless technology with your computer, the card is already installed.
Removing the Card
1. Follow the procedures in Before Working on Your Computer .
2. Remove the hard drive cover. See Removing the Hard Drive for an illustration of the hard drive cover.
3. Remove the WLAN card (see Removing a WLAN Card ).
4. Remove the hinge cover (see Removing the Hinge Cover ).
5. Remove the keyboard (see Removing the Keyboard ).
6. Remove the display assembly (see Removing the Display Assembly ).
7. Remove the palm rest (see Removing the Palm Rest ).
8. Remove the M2 x 3-mm screw that connects the card to the USB board.
9. Lift the card and cable and disconnect the card connector from the card.
10. Remove the card from the card compartment.