Dell OptiPlex GX1 User Manual
Page 77
Installing System Board Options: Dell OptiPlex GX1 and GX1p Midsize Managed PC Systems
file:///C|/infodev/2013/eDoc/OpGX1/SIG/options.htm[2/21/2013 12:07:24 PM]
6. Replace the expansion-card cage as described in "
Replacing the Expansion-Card Cage
7.
, and reconnect your computer and peripherals to their electrical outlets
and turn them on.
NOTE: If Enabled, the
option will cause the following message to be displayed
at the next system start-up:
ALERT! Cover was previously removed.
8. Enter the
and confirm that the battery is operating properly.
9. Enter the correct time and date through the System Setup program's Time and Date categories. Also,
use the copy you made in step 1 to restore the correct settings for other system configuration
information. Then exit the System Setup program.
10. Turn off your computer, and unplug it for at least 10 minutes.
11. After 10 minutes, plug in the computer, turn it on, and enter the System Setup program. If the time and
date are still incorrect, see the chapter titled "Getting Help" in your Diagnostics and Troubleshooting
Guide for instructions on obtaining technical assistance.