Dell OptiPlex GX1 - Manual (Page 50)

Using the ISA Configuration Utility: Dell OptiPlex GX1 and GX1p Midsize Managed PC Systems
file:///C|/infodev/2013/eDoc/OpGX1/SIG/utility.htm[2/21/2013 12:07:21 PM]
active cards, or click No to cancel the operation.
The ICU returns to the ICU window.
NOTICE: After removing a card from the system configuration using the ICU, you must turn off
the system and physically remove the card. Failure to do so can damage your system.
5. Remove the non-Plug and Play ISA expansion card from the computer.
See " Removing an Expansion Card " for instructions.
Viewing Resources
The ICU displays all resources currently used by your system.
To view all system resources, select System Resources from the View menu or click View. The System
Resource Usage dialog box (see
Figure 10 ) displays all resources currently used by the system.
Figure 10. System Resource Usage Dialog Box
To determine which card uses a particular resource shown in the System Resource Usage dialog box, select
the resource in question and then click Used By Card. The Card Resource Usage dialog box appears with
the information.
To view the resources that a particular card is using, select the card from the list displayed in the ICU
window, and then select Card Resources from the View menu or click View. The Card Resource Usage
dialog box displays the resources assigned to that card.
Figure 11 shows resources that might be assigned
to a network adapter card.
Figure 11. Card Resource Usage Dialog Box