Dell PowerEdge VRTX User Manual
Page 107
Error Code
Message Information
HWC5031
Message
IO module <number> is offline.
Details
The CMC has powered off the IOM.
Action
.
HWC5032
Message
A fabric mismatch detected on IO module <number>.
Details
The fabric type for IOM's on the same chassis fabric must
match.
Action
Check chassis fabric type in CMC GUI and compare to the
type of both IOM's.
HWC5034
Message
A link tuning failure detected on IO module <number>.
Details
Link tuning table not supported for this IO modular.
Action
Update the CMC firmware. If the issue persists, see
.
HWC5036
Message
A failure is detected on IO module <number>.
Details
The IOM module performance may be impacted.
Action
.
HWC6000
Message
The <name> controller is offline.
Details
Information and status from the controller is unavailable.
Action
Remove and reapply input power. If the issue persists, see
.
HWC6002
Message
The <name> controller is stuck in boot mode.
Details
Information and status from the controller is unavailable.
Action
Remove and reapply input power. If the issue persists, see
.
HWC6003
Message
The <name> controller is booting.
HWC6004
Message
Cannot communicate with <name> controller.
Details
Information and status from the controller is unavailable.
107