Dell POWEREDGE 1955 - Manual (Page 34)

34
About Your System
Server Module Messages
System messages appear on the screen to notify you of a possible problem with the system. Table 1-13
lists the system messages that can occur and the probable cause and corrective action for each message.
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your
warranty. Read and follow the safety instructions that came with the product.
NOTE:
If you receive a system message that is not listed in Table 1-13, check the documentation for the application
that is running when the message appears or the operating system's documentation for an explanation of the
message and recommended action.
Table 1-12. Gb Pass-through Module Indicators
Indicator Type Activity
Indicator Indicator Code
Link
indicator/activity
indicator Green/amber
blinking The Gb Ethernet connector is linked to the server module
and there is network activity
Green/off The Gb Ethernet connector is linked to the server module
and there is no network activity.
Off/amber blinking The Gb Ethernet connector is not linked to the server
module and there is network activity.
Off/off The Gb Ethernet connector is not linked to the server
module and there is no network activity.
Status indicator Green Module is operating correctly.
Green blinking Module is being powered down by the DRAC/MC controller
due to an I/O module mismatch. See "Guidelines for
Installing Connectivity Modules" on page 28.