See figure 1-11). the uplinks connect to the e, Le. table 1-10 lists the indicators on each switch – Dell POWEREDGE 1955 User Manual
Page 30
30
About Your System
Figure 1-11.
PowerConnect 5316M Ethernet Switch Module Indicators and Features
1
speed/link activity indicator
2
duplex mode indicator
3
system/diagnostic indicator
Table 1-10.
PowerConnect 5316M Ethernet Switch Module Indicators
Indicator Type
Activity
Indicator
Indicator Code
Speed/link activity
indicator (bicolor)
Off Not
connected.
Green
The port is connected to a valid link partner on the network.
Green blinking
Network data is being sent or received at 1 Gb.
Amber
The port is connected to a valid link partner on the network.
Amber blinking
Network data is being sent or received at 10 Mb or 100 Mb.
Duplex mode
indicator
Green
The port is operating at full duplex mode.
Off
The port is operating at half duplex mode.
System/diagnostic
indicator
Green blinking
Module is being powered down by the DRAC/MC controller
due to an I/O module mismatch. See "Guidelines for Installing
Connectivity Modules" on page 28.
Off
Module is operating normally.
1
2
3
16
15
14
13
12
11