Wlan/wimax card, Removing the wlan/wimax card – Dell Latitude E6400 User Manual
Page 94
Back to Contents Page
WLAN/WiMax Card
Dell™ Latitude™ E6400 and E6400 ATG and
Mobile Workstation Precision™ M2400 Service Manual
Removing the WLAN/WiMax Card
1.
Follow the procedures in
Before Working on Your Computer
.
2.
Remove the bottom of the base assembly (see
Removing the Bottom of the Base Assembly
).
3.
Disconnect the antenna cables from the card.
4.
Remove the M2 x 3-mm screw. The card will pop up at a 45-degree angle.
5.
Slide the card out of the card connector on the system board.
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions that shipped with your computer.
NOTICE:
Insert a WLAN or WiMax card only into the slot labeled WLAN/WiMax.
1
antenna cables (3)
2
WLAN/WiMax card
3
M2 x 3-mm screw
1
WLAN/WiMax card
2
card connector