Removing the display inverter (e6400 and m2400), Replacing the display inverter (e6400 and m2400) – Dell Latitude E6400 User Manual
Page 38
8.
Replace the display assembly (see
Replacing the Display Assembly (E6400 ATG)
).
9.
Replace the hinge covers (see
Replacing the Hinge Covers
).
10.
Replace the bottom of the base assembly (see
Replacing the Bottom of the Base Assembly
).
11.
Follow the procedures in
After Working on Your Computer
.
Removing the Display Inverter (E6400 and M2400)
1.
Follow the instructions in
Working on Your Computer
.
2.
Remove the bottom of the base assembly (see
Removing the Bottom of the Base Assembly
).
3.
Remove the hinge covers (see
Removing the Hinge Covers
).
4.
Remove the display assembly (see
Removing the Display Assembly (E6400 and M2400)
).
5.
Removing the Display Bezel (E6400 and M2400)
6.
Remove the two M2 x 3-mm screws from the display inverter.
7.
Disconnect the two display inverter connectors.
8.
Lift the display inverter out of the display cover.
Replacing the Display Inverter (E6400 and M2400)
1.
Connect the two display inverter connectors to the display inverter.
2.
Replace the two M2 x 3-mm screws securing the display inverter.
3.
Replace the display bezel (see
Replacing the Display Bezel (E6400 and M2400)
).
4.
Replace the display assembly (see
Replacing the Display Assembly (E6400 and M2400)
CAUTION:
Before you begin the following procedure, follow the safety instructions that shipped with your computer.
1 M2 x 3-mm screws (2) 2 display inverter connector
3 display inverter
4 display inverter connector
CAUTION:
Before you begin the following procedure, follow the safety instructions that shipped with your computer.