Replacing the i/o card – Dell Latitude E6400 User Manual
Page 24
Replacing the I/O Card
1.
Place the I/O card in the base assembly.
2.
Replace the M2 x 3-mm screw to secure the I/O card to the base assembly.
3.
Replace the plastic plug.
4.
Replace the RJ-11 modem connector (see
Replacing the RJ-11 Modem Connector
).
5.
Replace the modem (see
Replacing the Modem
).
6.
Replace the system board (see
Replacing the System Board Assembly
).
7.
Replace the card cage (see
Replacing the Card Cage
).
8.
Replace the palm rest assembly (see
Replacing the Palm Rest Assembly
).
9.
Replace the right speaker grill (see
Replacing the Right Speaker Grill/Fingerprint Reader Assembly
).
10.
Replace the keyboard (see
Replacing the Keyboard
).
11.
Replace the LED cover (see
Replacing the LED Cover
).
12.
Replace the display assembly (see
Replacing the Display Assembly (E6400 and M2400)
or
Replacing the Display Assembly (E6400 ATG)
).
13.
Replace the heatsink assembly (see
Replacing the Processor Heatsink Assembly
).
14.
Replace the hinge covers (see
Replacing the Hinge Covers
).
15.
Replace the modular drive (see
Replacing the Modular Drive
).
16.
Replace the hard drive (see
Replacing the Hard Drive
).
17.
Replace the bottom of the base assembly (see
Replacing the Bottom of the Base Assembly
).
18.
Follow the procedures in
After Working on Your Computer
.
1
plastic plug
2
M2 x 3-mm screw
3
I/O card
CAUTION:
Before you begin the following procedure, follow the safety instructions that shipped with your computer.