Modem, Removing the modem, Replacing the modem – Dell Latitude E6400 User Manual
Page 69
Back to Contents Page
Modem
Dell™ Latitude™ E6400 and E6400 ATG and
Mobile Workstation Precision™ M2400 Service Manual
Removing the Modem
1.
Follow the procedures in
Before Working on Your Computer
.
2.
Remove the LED cover (see
Removing the LED Cover
).
3.
Remove the keyboard (
Removing the Keyboard
).
4.
Remove the M2 x 3-mm screw from the modem.
5.
Use the pull tab to remove the modem from the I/O card.
6.
Disconnect the modem cable from the modem.
Replacing the Modem
1.
Connect the modem cable to the modem.
2.
Use the screw hole on the modem to align it with the connector on the I/O card.
3.
Press the area on the modem marked "Press Here" to connect the modem to the I/O card.
4.
Replace the M2 x 3-mm screw to secure the modem to the I/O card.
5.
Replace the keyboard (
Replacing the Keyboard
).
6.
Replace the LED cover (see
Replacing the LED Cover
).
7.
Follow the procedures in
After Working on Your Computer
.
CAUTION:
Before you begin the following procedure, follow the safety instructions that shipped with your computer.
1
M2 x 3-mm screw
2
modem cable
3
modem
CAUTION:
Before you begin the following procedure, follow the safety instructions that shipped with your computer.