Dell POWEREDGE R610 - Manual (Page 66)

66 Using the System Setup Program and UEFI Boot Manager
Embedded Server Management Screen
Power Management Screen
Failsafe Baud Rate
(115200 default)
Displays the failsafe baud rate used for console
redirection. BIOS attempts to determine the baud rate
automatically. This failsafe baud rate is used only if the
attempt fails. This rate should not be adjusted.
Remote Terminal Type
(VT100/VT220 default)
Sets the remote console terminal type, either
VT100/VT220 or ANSI.
Redirection After Boot
(Enabled default)
Enables or disables BIOS console redirection when the
operating system is loaded.
Option Description
Front Panel LCD Options Options are User Defined String, Model Number, or
None.
If the LCD Home display is set to anything other than
User Defined String, Model Number, or None, this
option in BIOS will display Advanced. You will not be
able to edit this setting in BIOS until it is set back to User
Defined String, Model Number, or None through
another LCD configuration utility (such as the iDRAC6
Configuration Utility or LCD panel menu).
User-Defined LCD String You can enter a name or other identifier for the system, to
be displayed on the LCD module screen.
Option Description
Power Management Options are OS Control, Active Power Controller,
Custom, or Maximum Performance.
If you select OS Control, Active Power Controller, or
Maximum Performance, the BIOS preconfigures the
remaining options on this screen. If you select Custom,
you can configure each option independently.
Option Description