Dell POWEREDGE R610 - Manual (Page 60)

60 Using the System Setup Program and UEFI Boot Manager
PCI IRQ
Assignment
Displays a screen to change the IRQ assigned to each of the
integrated devices on the PCI bus, and any installed
expansion card that requires an IRQ.
Serial
Communication
(Off default)
See "Serial Communication Screen."
Embedded Server
Management
See "Embedded Server Management Screen."
Power
Management
See "Power Management Screen."
System Security Displays a screen to configure the system password and setup
password features. See "System Security Screen," Using the
System Password," and "Using the Setup Password" for more
information.
Keyboard
NumLock
(On default)
Determines whether your system starts up with the NumLock
mode activated on 101- or 102-key keyboards (does not apply
to 84-key keyboards).
Report Keyboard
Errors
(Report default)
Enables or disables reporting of keyboard errors during the
POST. Select Report for host systems that have keyboards
attached. Select Do Not Report to suppress all error messages
relating to the keyboard or keyboard controller during POST.
This setting does not affect the operation of the keyboard
itself if a keyboard is attached to the system.
F1/F2 Prompt on
Error (Enabled
default)
Enables the system to halt on errors during POST, which
allows the user to observe events that may scroll by unnoticed
during normal POST. You can select F1 to continue or F2 to
enter the System Setup program.
CAUTION: When setting this option to Disabled, the
system will not halt if an error occurs during POST. Any
critical errors will be displayed and logged in the system
event log.
Option Description