beautypg.com

7 remove the sas backplane from the system – Dell POWEREDGE R610 User Manual

Page 133

background image

Installing System Components

133

5 Disconnect the power cable from the end of the SAS backplane.
6 Disconnect the SAS data cables from the backplane.
7 Remove the SAS backplane from the system:

a

While pulling the two blue latches towards the front of the system,

slide the backplane upward. See Figure 3-23.

b

When the backplane cannot slide upward any farther, pull the

backplane toward the back of the system to remove it from the

retention hooks.

c

Lift the board out of the system, being careful to avoid damaging

components on the face of the board.

d

Place the SAS backplane face down on a work surface.

See also other documents in the category Dell Computers: