Dell PowerEdge RAID Controller H700 - Manual (Page 123)

Security Key and RAID Management 123
NOTE: There is no passphrase backup option when you create a security key; you
need to remember your passphrase.
1 During the host system boot up, press when the BIOS
screen is displayed.
The
Virtual Disk Management screen is displayed.
If there is more than one controller, the main menu screen is displayed.
2 Select a controller, and press .
The Virtual Disk Management screen is displayed for the selected
controller.
3 Use the arrow keys to highlight Security Key Management.
4 Press to display the actions you can perform.
5 Select Create Key and press .
The Create Security Key screen is displayed. The cursor is at the Security
Key Identifier.
6 Enter an identifier for your security key.
NOTE: The Security Key Identifier is a user-supplied clear text label used to
associate the correct security key with the controller.
7 Press to enter a passphrase.
8 Press and select OK to accept the settings and to exit the window.
Select Cancel to exit if you do not want to create a security key on the
controller.
CAUTION: If you lose or forget your passphrase, the data in your virtual disk is
inaccessible.
PERC7.2_UG.book Page 123 Thursday, March 3, 2011 2:14 PM