3 executing transfers, 1 selecting clone mode, 2 selecting source disk – Acronis True Image Echo Server for Windows - User Guide User Manual

Page 91

No data will be lost because the original disk is only being read (no partitions are changed
or resized) until data transfer is completed.
We recommend that you do not delete data from the old disk until you are sure it is
correctly transferred to the new disk, the server boots up from it and all applications
work.

13.3 Executing transfers

13.3.1 Selecting Clone mode

You will see the Clone mode window just after the welcome window.

We recommend using automatic mode in most cases. The manual mode can be useful if
you need to change the disk partition layout.
If the program finds two disks, one partitioned and another unpartitioned, it will
automatically recognize the source disk as the partitioned disk and the destination disk as
the unpartitioned disk, so the next two steps will be bypassed.

13.3.2 Selecting source disk

If the program finds several partitioned disks, it will ask you which is the source (i.e. the
older data disk).