Baumer G0-GB-GXP5W/S/H-GXU5W/S - Manual (Page 3)

Manual_G0-GB-GXP5-GXU5_406_EN.docx 3/48 Baumer IVO GmbH & Co. KG
20.11.12 Villingen-Schwenningen, Germany
Disclaimer of liability
The present manual was compiled with utmost care, errors and omissions reserved. For this reason
Baumer IVO GmbH & Co. KG rejects any liability for the information compiled in the present manual.
Baumer IVO nor the author will accept any liability for direct or indirect damages resulting from the use of the
present information.
At any time we should be pleased receiving your comments and proposals for further improvement of the
present document.
1. Introduction
1.1. Scope of delivery
Please check the delivery upon completeness prior to commissioning.
Depending on encoder configuration and part number delivery is including:
Encoder
CD with describing file and manual (also available as download in the Internet)
1.2. Product assignment
Shaft encoders
Product Product code Device name Eds file Product family
GBP5W 0x18 GBP5 GBP5_406.eds Multiturn
GBU5W 0x19 GBU5 GBU5_406.eds Singleturn
GXP5W 0x14 GXP5 GXP5_406.eds Multiturn
GXU5W 0x15 GXU5 GXU5_406.eds Singleturn
X 700 0x14 GXP5 GXP5_406.eds Multiturn
End shaft encoders
Product Product code Device name Eds file Product family
GBP5S 0x18 GBP5 GBP5_406.eds Multiturn
GBU5S 0x19 GBU5 GBU5_406.eds Singleturn
GXP5S 0x14 GXP5 GXP5_406.eds Multiturn
GXU5S 0x15 GXU5 GXU5_406.eds Singleturn
Hollow shaft encoders
Product Product code Device name Eds file Product family
G0P5H 0x14 GXP5 GBP5_406.eds Multiturn
GBP5H 0x18 GBP5 GBP5_406.eds Multiturn