Edge Lighting Direct-End Power Feed Canopies User Manual
Monorail 2" square feed-end power canopy, For new construction, Installation instructions for

SAVE THESE INSTRUCTIONS!
MP-2SQ-FE-_
- This product is ETL listed for indoor dry locations.
- Minimum electrical box volume must be 6 cubic inches
(98 cubic centimeter).
- This product should be installed by a qualified electrician.
- This product installs to Edge Lighting 2" electrical box only.
Installation Instructions for
Monorail 2" Square Feed-End Power
Canopy
1
904-MP-2SQ-FE-04
IMPORTANT INFORMATION
1718 W. Fullerton Ave
Chicago, IL 60614
Tel: 773-770-1195
Fax: 773-935-5613
www.edgelighting.com
A
1: For Single Ceiling Frame Stud, use the Monorail 2"
standoff to mount the Feed-End Power Canopy closest to the
ceiling. Refer to the chart below to determine the 2"
electrical box distance from the ceiling frame stud.
DRY WALL
THICKNESS
A
1/2"
0.29"
5/8"
0.42"
3/4"
0.54"
CEILING DRYWALL
JOIST
For New Construction
ELECTRICAL BOX
STUD
SINGLE CEILING
FRAME STUD
A
1.9"
B
2:
use the Monorail 4"
standoff to mount the Feed-End Power Canopy closest to the
ceiling. Refer to the chart below to determine the 2"
electrical box distance from the ceiling frame stud.
For Double Ceiling Frame Stud,
DRY WALL
THICKNESS
A
1/2"
0.95"
5/8"
1.08"
3/4"
1.22"
CEILING DRYWALL
JOIST
ELECTRICAL BOX
STUD
DOUBLE CEILING
FRAME STUD
A
4"
© 2009 Edge Lighting. All Rights Reserved.