Edge Lighting Everest - Manual (Page 3)

3
1
2
N
1
2
N
10
10
11
11
10: Use fingers to tighten the Fast Jack fixture connector into
the Fast Jack system connector (Monorail, Monorail 2
Circuit, or canopy connector - Refer to the instructions
provided with the system connector or canopy).
11: Refer to the instructions provided with the Monorail 2
Circuit fixture connector to choose Circuit #1 or Circuit #2.
CIRCUIT #1 CIRCUIT #2
G
10
10
10
10
Install the Lamp
1: Lift both glass shades up to expose the socket.
2: Push the lamp pins completely into the socket holes.
3: Carefully lower the glass shade down one at a time.
H
CAUTION: To reduce risk of a burn or electrical shock during
lamping, disconnect the power to the fixture.
Use MAX 35 Watt, Type MR11 Front Glass Cover
Halogen Lamp.
LAMP
SOCKET
2
1
GLASS SHADE
GLASS SHADE
3