Edge Lighting Triumph - Manual (Page 2)

2
B
5
Use MAX 50 Watt, Type MR16 Front Glass Cover Halogen
Lamp.
CAUTION: To reduce risk of a burn or electrical shock during
lamping, disconnect the power to the fixture.
Install the MR16 Lamp with Multiple Optical Control Acessory
SOCKET
FIXTURE HEAD
1:
2: From inside the cap, use a small Allen wrench or pen point
to unscrew and remove the lens holder ring. The lens holder
ring will not be used.
Unscrew to remove the cap from fixture head.
4
3
CAP
SMALL ALLEN
WRENCH
LENS HOLDER
RING
CAP
1
3:
4: Push the lamp pins into the socket holes.
5: Place maximum of two optical glass lenses or combination
of the glass lens and hexcell louver in front of the MR16
lamp.
6: Screw the cap to the fixture body.
Pull a small portion of the socket out of the fixture head.
2
HEXCELL LOUVER
GLASS
LENS
6
Install the Fixture to Monorail Connector (MC-FJ-_)
1: Place the Fast Jack housing onto the Monorail and use
fingers to tighten the Fast Jack housing connector to the Fast
Jack housing. Make sure that the Fast Jack housing
connector is not cross threaded.
2: Use fingers to tighten the Fast Jack fixture connector into the
Fast Jack housing connector.
C
Install the Fixture to Monorail
2 Circuit Connector (M2C-FJ-_)
FAST JACK
HOUSING
1
FAST JACK HOUSING
CONNECTOR
FAST JACK
FIXTURE
CONNECTOR
2
2
MONORAIL
D
1: Place the Fast Jack housing onto the Monorail 2 Circuit and
use finger to tighten the Fast Jack housing connector to the
Fast Jack housing. Make sure that the Fast Jack housing
connector is not cross threaded.
2: Use fingers to tighten the Fast Jack fixture connector into
the Fast Jack housing connector.
FAST JACK HOUSING
CONNECTOR
FAST JACK
HOUSING
1
FAST JACK
FIXTURE
CONNECTOR
2
2
MONORAIL 2 CIRCUIT