Edge Lighting Harley with Gobo - Manual (Page 2)

2
LAMP HOLDER
4: Screw the two metal rods completely into the threaded holes
on the lamp holder of the Harley fixture.
C
4
SPRING
GOBO
GOBO HOLDER RING
D
5: Place the gobo inside the gobo holder ring.
6: Squeeze the spring end and place it properly on front of the
gobo into the gobo holder ring.
7: Release the spring ends to secure the gobo in place.
5
6
7
METAL ROD
4
7
SNOOT
E
8: Place the snoot completely into the lamp holder.
9: Place the lens accessory (optional) in to lamp holder. Place
the lamp completely against the snoot (or lens) and secure
it in place by tightening the ring holder.
10: Push the socket holes completely onto the lamp pins.
LAMP HOLDER
SOCKET
LAMP
LENS HOLDER RING
ACCESSORY
8
9
F
METAL ROD
GOBO HOLDER RING
THUMB
SCREW
11: Place the gobo holder ring holes onto the metal rods. Slide
the gobo holder ring back against the snoot and tighten the
thumb screws.
LAMP HOLDER
11
10