Copyright © 2006 dako, inc. all rights reserved, User resources, Installation procedure – Dako Autostainer User Manual
Page 5: Relocation procedure, Scope, Disclaimers, Contact information
Copyright © 2006 Dako, Inc. All rights reserved.
This document may not be copied in whole or in part or reproduced in any other media
without the express written permission of Dako, Inc. Please note that under copyright
law, copying includes translation into another language.
User Resources
For the latest information on Dako products and services, please visit the Dako Web site
at:
Installation Procedure
Dako employees will perform the initial installation and setup of all new System
instruments.
Relocation Procedure
Contact Dako’s Technical Service Group before relocating your system.
Scope
This handbook contains basic information on the use and operation of the Autostainer
and assumes you have received basic training on the instrument. Please contact our
Technical Service Group or refer to the Autostainer User Guide for information not
provided in this manual. This manual does not provide instructions for the installation or
upgrade of hardware.
Disclaimers
This manual is not a substitute for the detailed operator training provided by Dako, Inc.,
or for other advanced instruction. Dako Technical Service Group should be contacted
immediately for assistance in the event of any instrument malfunction. Installation of
hardware or software on your Autostainer should be performed only by a certified Dako
Field Service Representative.
Contact Information
U.S. Customers
Dako, Inc
6392 Via Real
Carpinteria, CA 93013 USA
Tel 805-566-6655
Fax 805-566-6688
Technical Support 800-424-0021
Customer Service 800-235-5763
Outside U.S.
Dako Denmark A/S
Produktionsvej 42
DK-2600 Glostrup Denmark
Tel +45 4485 9500
Fax +45 4485 9595
Autostainer Handbook
v