Yealink SIP-T48G User Manual
Page 82
User Guide for the SIP-T48G IP Phone
72
Usage: Tap the conference key during an active call to set up a conference with the
number specified in the Value field.
Note
Forward
You can use this key feature to forward an incoming call to someone else. For more
information, refer to
on page
Dependencies:
Type (Key Event)
Key Event (Forward)
Label (key label displayed on the touch screen)
Value (the number you want to forward to)
Usage:
1. Tap the forward key to forward an incoming call to the number specified in the
Value field.
2. When call forward is in phone mode, tap the forward key to activate call forward
for the phone.
3. When call forward is in custom mode, tap the forward key to access the custom call
forward interface. You can activate or deactivate call forward for one or all
accounts.
Note
Transfer
You can use this key feature to handle the call differently depending on the transfer
mode on DSS key when there is an active call on the phone.
Dependencies:
Type (Key Event)
Key Event (Transfer)
Label (key label displayed on the touch screen)
Value (the number you want to transfer to)
Usage:
When the transfer mode on DSS key is Blind Transfer, tap the transfer key to
complete the blind transfer to the number specified in the Value field.
When the transfer mode on DSS key is Attended Transfer, tap the transfer key to
dial out the number specified in the Value field, and then perform the attended or
semi-attended transfer.
When the transfer mode on DSS key is New Call, tap the transfer key to place a
If the Value field is left blank, the forward key performs the same as the Forward soft key
when receiving an incoming call.
When leaving the Value field blank, the conference key performs the same as the
Conference soft key during a call.