Yealink SIP-T48G - Manual (Page 140)

User Guide for the SIP-T48G IP Phone
130
7. Tap the Save soft key to accept the change or to cancel.
8. Tap the DSS Key key to return to the idle screen.
Record and URL record key are configurable via web user interface at the path
DSSKey->Line Key.
The Record and URL Record keys control the recording, and are available:

During an active call

When calls are on hold or mute

During a blind or attended transfer

During a conference call

When the phone prompts you to answer an incoming call
The Record and URL Record keys are not available when:

There is no connected calls on your phone

You place a new call
To record a call:
1. Tap the Record key or URL Record key during a call.
If the recording starts successfully, the recording icon will appear on the touch
screen and the icon of the Record key or URL Record key changes to .
2. Tap the Record key or URL Record key again to stop recording.
The recording icon disappears from the touch screen and the icon of the Record key
or URL Record key changes to .
Recording status indications you need to know:
Circumstance Icons on the touch screen
A recording is started appears on the touch screen
A recording cannot be started appears for 1 second
A recording cannot be stopped appears for 1 second, then goes back
The recording box is full appears for 1 second
The call cannot be recorded appears for 1 second
You can listen to the recordings stored on your server system. For example, you can dial
an access code to listen to the recordings.
Note The way in which you listen to the recordings may be different on different servers.
Contact your system administrator for more information.