Yealink SIP-T48G - Manual (Page 126)

User Guide for the SIP-T48G IP Phone
116
3. Enter the conference URI (e.g., [email protected]) in the Conference URI
field.
4. Click Confirm to accept the change.
Note
To set up a network conference call:
1. Place a call to the first party.
2. Tap the Conference soft key to place a new call.
The active call is placed on hold.
3. Enter the number of the second party and press , , or tap the Send soft
key.
4. When the second party answers the call, tap the Conference soft key to add the
second party to the conference.
5. Tap the Conference soft key to place a new call.
The conference call is placed on hold.
6. Enter the number of the new party and then press , , or tap the Send soft
key.
7. When the new party answers the call, tap the Conference soft key to add the new
party to the conference.
8. Repeat steps 5 to 7 until you have added all intended parties.
The procedures to set up a network conference call on specific servers may be different
from introduced above. Contact your system administrator for more information.
Network conference is configurable via web user interface only.