Yealink SIP-T48G - Manual (Page 70)

User Guide for the SIP-T48G IP Phone
60
using the headset to place a call, refer to Placing Calls on page 88 .
To deactivate the headset mode:
1. Press again on the phone.
The HEADSET key LED goes out, and the icon disappears from the touch screen
when the headset mode is deactivated.
You can use headset in priority when enabling headset prior. This feature is especially
useful for permanent or full-time headset users.
To enable headset prior via web user interface:
1. Click on Features->General Information.
2. Select Enabled from the pull-down list of Headset Prior.
3. Click Confirm to accept the change.
To use headset prior, you should activate the headset mode in advance:
1. Physically connect the headset.
2. Press to activate the headset mode.
Note If headset prior is enabled, the headset mode will not be deactivated until you press the
HEADSET key again.
Headset prior is configurable via web user interface only.