Counters management – Carlo Gavazzi WM4-96 User Manual

Page 38

15-press the

key again to open the box where the day

is to be set,

16-use the

and

keys to select the desired day (from

1 to 31 depending on the previously selected month);

17-press the

key to confirm the selection and move to

th next parameter.
To program the “end date” follow the same procedure
described above from step 11 to step 16. After confirming

the “end” day by means of the

key, the HOLIDAY Box is

highlighted to indicate the conclusion of the HOLIDAY peri-

od programming cycle. You can

also use the

(moves from

right to left) and

(moves from

left to right) keys to scroll along
the available parameters.
It’s possible to choose the tariff to
be associated to the HOLIDAY
period according to the following
procedure: starting from the box
on the previous page, step 10,

press the

key again: the

instrument will display the box

shown on the left. Press

: the

box relevant to the “trf” value is highlighted; press the
key again: the instrument will display on the lower section
the box where the tariff is to be set. Select the desired tariff

(from 1 to 4) by means of the

and

keys and confirm

it with

. To reset your choices and/or exit the menus,

use the

key.

▼

▲

▼

▲

▼

▲

Counters Management

Trf Holiday period

Average calculation

From p. 38

To p. 38

▲

1.2..
..2.1

▼