Displaying of the variables – Carlo Gavazzi WM4-96 User Manual

Page 16

▲

Displaying of the variables

Inputs

Energy Meters pages

❑

Pass "998": display of the stored dmd variables

(Only if the RS232 + RTC module is present)

The stored dmd variables can be displayed by pressing

the

key in any one of the measuring page (excluded the

“load profile” pages): when the instrument asks for the

, enter the value “998”: the instrument will

display the values of the stored variables, the time (hours-
minutes-seconds) and the date (day-month) of storage.

Use

the and keys

scroll

all the values; to exit press the
key. If the value has not been
stored, the instrument displays

“NOT AVAILABLE VALUE”.

❑

Pass "997": Reset of the Data Memory (only if the

RS232+RTC module is available)

It’s possible to reset all the information stored in the data mem-

ory. To enter this function press the

key in any one of the

measuring pages (excluded the “load profile” pages), when the

instrument asks for

, enter the value “997” and

confirm with

, then press

to confirm the reset; press

not to execute the reset.

❑

Pass "996": Reset of the load profiles

It’s possible to reset all the information relating to the

load profiles. To enter this function, press the

key in any

one of the measuring pages (excluded the “load profile

pages”), when the instrument asks for

enter the value “996” and confirm with

, then press

again

to confirm the reset, press

not to execute the reset.

▼

▲