Bio-Rad PROTEAN II XL Cell - Manual (Page 40)

34
Equipment and Accesorries (continued)
Glass Tubes
Product Description
ID OD Length Pkg. Catalog
mm mm mm Qty. Number
1.0 5.0 180 24 165-3136
1.5 6.0 150 24 165-3137
1.5 6.0 180 24 165-3138
2.0 6.5 180 24 165-3139
2.4 4.0 160 24 165-3155
3.0 5.0 125 24 165-3150
5.0 7.0 125 24 165-3122
13.3 PROTEAN II xi 2-D Cells
Catalog
Product Description Number
PROTEAN II xi 2-D Cell, 1.0 mm, 16 cm 165-1931
PROTEAN II xi 2-D Cell, 1.5 mm, 16 cm 165-1932
PROTEAN II xi 2-D Cell, 1.0 mm, 20 cm 165-1933
PROTEAN II xi 2-D Cell, 1.5 mm, 20 cm 165-1934
PROTEAN II xi 2-D cells include central cooling core, lower buffer chamber, lid with power cables, 2 sets of
glass plates (with bevel), 4 sandwich clamps, 24 glass tubes (tube diameter = spacer thickness), 2 tube gel
adaptors, 16 stoppers, 16 grommets, 2 2-D combs, 4 spacers, 1 upper buffer dam, slab casting stand, leveling
bubble, alignment card, and instructions.
13.4 Accessories
Catalog
Product Description Number
Tube Gel Adaptor, with a complete set of grommets 165-1940
(4-8 mm O.D. tubes) and stoppers
Tube Gel Adaptor Replacement Gaskets, 2 165-1947
Stoppers, 8 165-1941
Grommets and Stoppers for 4-5 mm OD Tubes, 12 165-1984
Grommets and Stoppers for 6–7 mm OD Tubes, 12 165-1985
Gel Tube Loading Needle, 18 cm, 22 gauge, blunt tip, 165-1943
Luer hub (for casting monomer in small diameter
tubes)
Gel Tube Extrusion Needle, 9 cm, 26 gauge, beveled 165-1944
tip, Luer hub (for removing gels from tubes)
PROTEAN II xi Multi-Gel Casting Chamber 165-2025