Bio-Rad PROTEAN II XL Cell - Manual (Page 37)

31
Section 13
Equipment and Accessories
13.1 PROTEAN II® xi Cell Configurations
Catalog
Product Description Number
PROTEAN II xi Cells
PROTEAN II xi 16 cm Cell* 165-1801
1.5 mm spacer (4), 15 well comb (2) 165-1802
1.0 mm spacer (4), 15 well comb (2) 165-1803
0.75 mm spacer (4), 15 well comb (2) 165-1804
PROTEAN II xi 20 cm Cell* 165-1811
1.5 mm spacer (4), 15 well comb (2) 165-1812
1.0 mm spacer (4), 15 well comb (2) 165-1813
0.75 mm spacer (4), 15 well comb (2) 165-1814
All PROTEAN II xi cells include the central cooling core with gaskets and core caps, lower buffer chamber, lid
with power cables, 2 sets of glass plates, 4 sandwich clamps, 4 spacers, 2 combs, an upper buffer dam, a
casting stand with gaskets, a leveling bubble, alignment card, and instructions.
*Cells contain all of the above except spacers and combs (order separately).
13.2 Accessories
Catalog Number
Product Description 16 cm cell 20 cm cell
Glass Plates*
Inner Plate (2) 165-1821 165-1823
Outer Plate (2) 165-1822 165-1824
†Frosted Inner Plate (2) (agarose gels) 165-1825 165-1826
†Beveled Inner Plate (2) (2-D procedures) 165-1827 165-1828
**Notched Inner Plate (1) (double-up 165-1832 165-1833
procedures)
*Note: One complete gel sandwich consists of 1 outer (long) plate, 1 inner (short) plate, and 2 spacers.
** One complete “double-up” sandwich (2 gels/side) consists of 1 outer plate, 1 inner plate, 1 notched inner
plate, and 4 spacers. See Section 3.2 for assembly.
†Used in conjunction with regular outer plate.
PROTEAN II Plate Washer/Holder
Plate Washer System, includes: Plate Holders (2), 165-1991
Tank and Lid
Plate Holder (1)
165-1992