Great Plains ADC2220 Predelivery Manual - Manual (Page 8)

167-088Q-RUS 3/3/2006
ADC2220 & NTA 3510 6
Definitions
Right and left as used in this manual are deter-
mined by facing the direction the machine will
travel while in use unless otherwise stated.
NOTE: Useful information related to the preced-
ing topic.
Assembly and Setup Assistance
To order additional copies of dealer assembly in-
structions or operator’s and parts manuals, write
to the following address. Include model numbers
in all correspondence.
If you do not understand any part of this manual
or have other assembly or setup questions, as-
sistance is available. Contact
Product Support
Great Plains Mfg. Inc., Service Department
P.O. Box 5060
Salina, KS 67402-5060
Great Plains welcomes you to its growing family
of new product owners. This Air Drill Cart and
this Air Drill Implement have been designed with
care and built by skilled workers using quality
materials. Proper setup, maintenance and safe
operating practices will help you get years of sat-
isfactory use from the machine.
Description of Unit
The ADC2220 is a grain drill cart that uses air to
move seed or fertilizer from the cart bins to the
implement. Air is supplied by a fan driven by a
hydraulic motor. Pressurized meters under the
bins dispense material into the air stream at a
rate proportional to distance traveled. The meter
rate can be adjusted.
The NTA3510 is a seeding implement, with a
working width of 35 feet, designed to tow behind
a Great Plains air drill cart. This implement is de-
signed for no-till field conditions. Coulters open a
narrow seedbed. Disk-type, parallel-linkage
openers follow each coulter, widening the seed-
bed and delivering seed to the trench.
Intended Usage
Use this cart with a Great Plains air drill imple-
ment. Use the cart for seeding small grains and
legumes or applying dry, granular fertilizer.
Models Covered
ADC2220, NTA 3510
Using This Manual
This manual was written to help you assemble
and prepare the new machine for the customer.
The manual includes instructions for assembly
and setup. Read this manual and follow the rec-
ommendations for safe, efficient and proper as-
sembly and setup.
An operator’s manual is also provided with the
new machine. Read and understand “Important
Safety Information” and “Operating Instruc-
tions” in the operator’s manual before assem-
bling the machine. As a reference, keep the
operator’s manual on hand while assembling.
The information in this manual is current at print-
ing. Some parts may change to assure top per-
formance.
Introduction
IMPORTANT: A crucial point of information related to
the preceding topic. For safe and correct operation,
read and follow the directions provided before continu-
ing.