Great Plains ADC2220 Predelivery Manual - Manual (Page 45)

3/3/2006 167-088Q-RUS
43 Implement Assembly
Refer to Figure 97
3. Remove tie-down strap and hydraulic cylinder
from frame.
4. Attach base end of gauge wheel hydraulic cyl-
inder to eyebolt weldment on gauge wheel.
5. Secure rod end of hydraulic cylinder to gauge
wheel arm using pin and cotter pin.
Refer to Figure 98
6. Attach gauge wheel tire (1) to gauge wheel
hub assembly (2). Secure tire to hub with
wheel nuts.
7. Repeat step 6 to install gauge wheel tire on
other side of gauge wheel arm.
24152
Figure 97
Gauge Wheel Hydraulic Cylinder
24143
Figure 98
Attach Gauge Wheel Tires
Coulter Blades
Refer to Figure 99
1. Attach coulter blade to coulter hub assem-
bly using bolts.
NOTE: If attaching turbo coulter blades,
blades must attach properly with rotation ar-
row pointing toward direction of travel.
2. Attach remaining blades to coulter hub as-
semblies.
24110
23343
Figure 99
Coulter Blades