Great Plains ADC2220 Predelivery Manual - Manual (Page 20)

167-088Q-RUS 3/3/2006
ADC2220 & NTA 3510 18
23454
23453
Figure 29
Front Bin
Figure 28
Bin
Refer to Figure 27
5. Unscrew and remove all bolts securing bin to
the rack.
6. Using forklift or other implement, carefully
raise bin from rack.
Refer to Figure 28
7. Once bin is removed from rack, carefully lower
bin on its side as shown in Figure 28. Remove
lift straps from forklift.
NOTE: Be careful when handling bins. To pre-
vent damage, bins should be supported at all
times.
8. Gently maneuver bin to sit upright.
Refer to Figure 29
9. Reposition lift straps on bin so bin may be
raised with forklift as shown in Figure 29.
10. Raise bin from ground using forklift.
23046
Figure 27
Remove Bolts