Great Plains ADC2220 Predelivery Manual - Manual (Page 48)

167-088Q-RUS 3/3/2006
ADC2220 & NTA 3510 46
24158
24157
Refer to Figure 105
9. If not already attached, attach press
wheel (8) to press wheel arm (5) with
bolt (7) and lock washer (6).
10. Insert press wheel arm pivot tube (3)
and parallel arm pivot bushings (4) into
parallel arm (5).
11. Secure parallel arm (5) to opener body
with bolt (1) and hex nut (2).
12. Complete steps 9-11 for all press
wheels.
Air Towers
Refer to Figure 106
NOTE: On the NTA3510 frame there are sev-
eral white markings. These markings indi-
cate air tower placement.
Refer to Figure 107
1. Attach air tower to NTA3510 frame
where indicated by white markings.
Figure 106
Marking for Air Tower
Figure 107
Air Tower
24185
Figure 105
Press Wheel